Home »
Our Products »
Sterilization » Autoclave Vertical
Double Walled High Pressure For Dry Sterlization
Autoclave Vertical Double Walled High Pressure For Dry
Sterlization
APPLICATIONS
- Triple walled High Pressure Autoclave are used where Dry
Sterilization is required.
- Triple walled High Pressure Vertical Autoclave
are most ideal for critical applications requiring assured and reliable
total destruction of all living micro- organisms
- It is used for sterilizing of surgical instruments, dressing
material, linen, rubber, plastic material, injection liquids by means of
steam under pressure of 15 to 20 psi. (adjustable).
SALIENT FEATURES &
CONSTRUCTION
- Used for Dry Sterilization
- Steam Jacket & Outer wall made of S. S. 304 Grade
- Water Level Indicator
- Lid Closing by Radial Locking System
- Sealing of Lid by Neoprene Rubber Gasket
- Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
- Operating range from 15psi to 20psi pressure
- Voltage: 220 Volts AC (50 Hz)
TECHNICAL SPECIFICATIONS & ORDERING INFORMATIONS
| PARAMETERS |
MODEL ACT- 1 |
MODEL ACT – 2 |
MODEL ACT – 3 |
| Inner Dimensions (Dia x Height) |
250x450mm |
300x500mm |
350x550mm |
| Inches Conversion |
10 x 18 |
12 x 20 |
14 x 22 |
| Capacity |
22 ltrs |
40 ltrs |
50 ltrs |
| Working Load |
3.0 KW |
4.0 KW |
4.0 KW |
| Gasket |
Made of Neoprene Rubber |
| Sterilizing pressure |
1.2 kgf / cm (15psi)at 121°c |
| Pressure Gauge |
0-2.1 kgf / cm² (30 psi) |
| Operating pressure |
From 15 to 20psi (Adjustable) |
| Steam Jacket |
Stainless Steel (SS-304) argon welded |
| Top Lid |
Made of Stainless Steel |
| Lid Tightening |
Radial Locking system worked by handle |
| Lid Opening |
Paddle lifting device |
| Water Level Indicator |
Fitted on the outer chamber |
| Boiler – Hydraulically Tested |
Up to +40 psi |
| Accuracy |
+ 3 psi |
| Safety Device |
Spring Loaded Type |
| Water Draining System |
Hand Operated Valve |
| Heating |
BY ISI Marked Immersion Heaters |
| Steam & Vacuum Release |
By Valve |
| Power Supply |
220/230V AC, 50/60Hz |
| PARAMETERS |
MODEL ACT – 4 |
MODEL ACT – 5 |
MODEL ACT – 6 |
| Inner Dimensions (Dia x Height) |
400x600mm |
450x600mm |
550X750MM |
| Inches Conversion |
16 x 24 |
18 x 24 |
22 x 30 |
| Capacity |
78 ltrs |
98 ltrs |
152 ltrs |
| Working Load |
5.0 KW |
6.0 KW |
7.5 KW |
| Gasket |
Made of Neoprene Rubber |
| Sterilizing pressure |
1.2 kgf / cm (15psi)at 121°c |
| Pressure Gauge |
0-2.1 kgf / cm² (30 psi) |
| Operating pressure |
From 15 to 20psi (Adjustable) |
| Steam Jacket |
Stainless Steel (SS-304) argon welded |
| Top Lid |
Made of Stainless Steel |
| Lid Tightening |
Radial Locking system worked by handle |
| Lid Opening |
Paddle lifting device |
| Water Level Indicator |
Fitted on the outer chamber |
| Boiler – Hydraulically Tested |
Up to +40 psi |
| Accuracy |
+ 3 psi |
| Safety Device |
Spring Loaded Type |
| Water Draining System |
Hand Operated Valve |
| Heating |
BY ISI Marked Immersion Heaters |
| Steam & Vacuum Release |
By Valve |
| Power Supply |
220/230V AC, 50/60Hz |
OPTIONAL FEATURES
| Present Pressure Operation |
Automatic Switch Piezostat (Pressure
Control Switch) |
| Heater Safety |
Automatic cut-off Device |
| Pre-set Time Operation |
By Mechanical / Digital Timers Analogue 0-60 minutes
|
| Temperature Display |
By Dial Type / Digital Temperature Indicators with
LED display. |
| Temperature Recording |
Thermograph with / without digital display -
Circular Type |
