| PARAMETERS | MODEL ACA - 1 | MODEL ACA - 2 | MODEL ACA - 3 |
| Inner Dimensions (Dia x Height) | 250x450mm | 300x500mm | 350x550mm |
| Inches Conversion | 10 x 18 | 12 x 20 | 14 x 22 |
| Capacity | 22 ltrs | 40 ltrs | 50 ltrs |
| Working Load | 2.0 KW | 2.0 KW | 3.0 KW |
| Gasket | Made of Neoprene Rubber | ||
| Sterilizing pressure | 1.2 kgf / cm (15psi)at 121°c | ||
| Pressure Gauge | 0-2.1 kgf / cm² (30 psi) | ||
| Operating pressure | From 15 to 20psi (Adjustable) | ||
| Inner Pressure Tank | Stainless Steel (SS-304) | ||
| Top Lid | Mild Steel Plate lined with Stainless Steel from inside | ||
| Basket | Made of Stainless Steel | ||
| Lid Tightening | Radial Locking system worked by handle | ||
| Lid Opening | Paddle lifting device | ||
| Water Level Indicator | Fitted on the outer chamber | ||
| Boiler – Hydraulically Tested | Upto +40 psi | ||
| Accuracy | + 3 psi | ||
| Controller (PLC Based) | µProcessor Based Fully Automatic Fuzzy Logic Control System. | ||
| Display | 16x4 line Alphanumeric Digital LCD with backlet display with Set value (SV) and Process Value (PV) | ||
| Timer (Auto Time Control) & Buzzer | Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end. | ||
| Safety Device | Spring Loaded Type | ||
| Water Draining System | Hand Operated Valve | ||
| Heating | BY ISI Marked Immersion Heaters | ||
| Steam & Vacuum Release | By Valve | ||
| Digital Pressure Controller | With electronic transducer and siphon. | ||
| PLC Based Control System | Touch Screen (HMI) with respect to time and temperature programmable by user. | ||
| Customized Programme | with inbuilt data recording in pen drive. Facility also available | ||
| Power Supply | 220/230V AC, 50/60Hz | ||
| PARAMETERS | MODEL ACA - 4 | MODEL ACA - 5 |
| Inner Dimensions (Dia x Height) | 450x600mm | 550x750mm |
| Inches Conversion | 18 x 24 | 22 x 30 |
| Capacity | 98 ltrs | 152 ltrs |
| Working Load | 4.0 KW | 6.0 KW |
| Gasket | Made of Neoprene Rubber | |
| Sterilizing pressure | 1.2 kgf / cm (15psi)at 121°c | |
| Pressure Gauge | 0-2.1 kgf / cm² (30 psi) | |
| Operating pressure | From 15 to 20psi (Adjustable) | |
| Inner Pressure Tank | Stainless Steel (SS-304) | |
| Top Lid | Mild Steel Plate lined with Stainless Steel from insideq | |
| Basket | Made of Stainless Steel | |
| Lid Tightening | Radial Locking system worked by handle | |
| Lid Opening | Paddle lifting device | |
| Water Level Indicator | Fitted on the outer chamber | |
| Boiler – Hydraulically Tested | Upto +40 psi | |
| Accuracy | + 3 psi | |
| Controller (PLC Based) | µProcessor Based Fully Automatic Fuzzy Logic Control System. | |
| Display | 16x4 line Alphanumeric Digital LCD with backlet display with Set value (SV) and Process Value (PV) | |
| Timer (Auto Time Control) & Buzzer | Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end. | |
| Safety Device | Spring Loaded Type | |
| Water Draining System | Hand Operated Valve | |
| Heating | BY ISI Marked Immersion Heaters | |
| Steam & Vacuum Release | By Valve | |
| Digital Pressure Controller | With electronic transducer and siphon. | |
| PLC Based Control System | Touch Screen (HMI) with respect to time and temperature programmable by user. | |
| Customized Programme | with inbuilt data recording in pen drive. Facility also available | |
| Power Supply | 220/230V AC, 50/60Hz | |
