Pharmaceutical Equipments

Granulator equipment is generally used to render powders to a specific form that facilities their flow ability and ingredients like powdered incipient, small amounts of active ingredients and the liquied binder that locks the powder as granules to prevent Segregation which is suitable for granulating the dry materials.

Salient Features

• Efficient reciprocating type Granulator. It is suitable for granulating dry materials.
• It is quiet in operation and robust and durable in design.
• A totally enclosed gearbox is mounted on a base pillar at a convenient height.
• All gearing is enclosed in oil bath. No grease or other external lubrication is required.
• Hopper, the granulating baledes both for dry and wet, sieves and all other parts which come in contact with the material to be granulated are made from Stainless Steel.
• Lower Guard of polished Stainless Steel.

• Motor : ½ HP Single Phase
• Operated : Three Speeds by Belt
• Sieve Size : 6"
• Height : 4"
• Maximum RPM : 2200
• Minimum RPM : 800

SPARE SIEVES FOR ABOVE
-DO- SAME AS ABOVE BUT WITH (INDUSTRIAL MODEL)

• Motor : 3 HP Single Phase
• Operated : Three Speeds by Belt
• Sieve Size : 10" Approx
• Height : 5.5"
• Maximum RPM : 2200
• Minimum RPM : 800

• Single Compartment
• 2 Compartment
• 3 Compartment
• 4 Compartment
• 5 Compartment

Ten speed, from 025 mm/sec. to 500 mm/sec. Special heavy duty motor, "dual gear train jerk free running. Instantaneous stop & start clutch. Double contact arm with contact block provision for jointed arm - uprights: stainless steel spindle : with lift, 15×15 cm cylinder with pilot lamp, plug & cord.

With special heavy duty motor 'Oil' lapped gear system: speeds from 12 mm/sec to 640 mm / sec in 8 steps jerk free running instantabeous start & stop clutch, stainless steel spindle with screw lift 15 cm × cm cylinder with pilot lamp. Plug & cord.

Mechanically driven : double contact arm with contact block with stainless steel spindle with screw lift, 15 cm × 15 cm cylinder with leveling screws.

Improved pinion Lift Model

-do- with Thermostatic Control along with all accessories

-do- with Thermostatic Control along with all accessories

Extractor Capacity 200 ml, Flask Capacity 500 ml. Condenser 250 mm, made according to latest Indian pharmacopoeia specification complete with flask and interchangeable ground joints. All parts made of Borsilicate glass with high thermal resistance.

• Same as above but with extractor capacity 100 ml flask capacity 250 ml, condenser 200 ml.
• Mild steel housing bath with six test for above (without glass parts & clamps)

Made of S. Steel having cap. 500 ml fitted with S.S. Sieves Complete with percolator lid, drain cock with 3 leg stand.
-do- same as above but capacity 1000 ml.